cisco_wlc_ssh¶
Warning
This is automatically generated. In case of any issues, please refer to the source code or, even better, open an issue on the GitHub repository. Thanks! 🤗📖
Commands¶
enable¶
Output: None
Help: enter enable mode
Prompt: - cisco_wlc_ssh>
show 802.11a¶
Output:
802.11a Network.................................. Disabled
11acSupport...................................... Enabled
11nSupport....................................... Enabled
802.11a Low Band........................... Enabled
802.11a Mid Band........................... Enabled
802.11a High Band.......................... Enabled
802.11a Operational Rates
802.11a 6M Rate.............................. Mandatory
802.11a 9M Rate.............................. Supported
802.11a 12M Rate............................. Mandatory
802.11a 18M Rate............................. Supported
802.11a 24M Rate............................. Mandatory
802.11a 36M Rate............................. Supported
802.11a 48M Rate............................. Supported
802.11a 54M Rate............................. Supported
802.11n MCS Settings:
MCS 0........................................ Supported
MCS 1........................................ Supported
MCS 2........................................ Supported
MCS 3........................................ Supported
MCS 4........................................ Supported
MCS 5........................................ Supported
MCS 6........................................ Supported
MCS 7........................................ Supported
MCS 8........................................ Supported
MCS 9........................................ Supported
MCS 10....................................... Supported
MCS 11....................................... Supported
MCS 12....................................... Supported
MCS 13....................................... Supported
MCS 14....................................... Supported
MCS 15....................................... Supported
MCS 16....................................... Supported
MCS 17....................................... Supported
MCS 18....................................... Supported
MCS 19....................................... Supported
MCS 20....................................... Supported
MCS 21....................................... Supported
MCS 22....................................... Supported
MCS 23....................................... Supported
MCS 24....................................... Supported
MCS 25....................................... Supported
MCS 26....................................... Supported
MCS 27....................................... Supported
MCS 28....................................... Supported
MCS 29....................................... Supported
MCS 30....................................... Supported
MCS 31....................................... Supported
802.11ac MCS Settings:
Nss=1: MCS 0-9 .............................. Supported
Nss=2: MCS 0-9 .............................. Supported
Nss=3: MCS 0-9 .............................. Supported
Nss=4: MCS 0-7 .............................. Supported
802.11n Status:
A-MPDU Tx:
Priority 0............................... Enabled
Priority 1............................... Enabled
Priority 2............................... Enabled
Priority 3............................... Enabled
Priority 4............................... Enabled
Priority 5............................... Enabled
Priority 6............................... Disabled
Priority 7............................... Disabled
Aggregation scheduler.................... Enabled
Frame Burst.............................. Automatic
Realtime Timeout..................... 10
Non Realtime Timeout................. 200
A-MSDU Tx:
Priority 0............................... Enabled
Priority 1............................... Enabled
Priority 2............................... Enabled
Priority 3............................... Enabled
Priority 4............................... Enabled
Priority 5............................... Enabled
Priority 6............................... Disabled
Priority 7............................... Disabled
A-MSDU Max Subframes ........................ 3
A-MSDU MAX Length ........................... 8k
Rifs Rx ..................................... Enabled
Guard Interval .............................. Any
Beacon Interval.................................. 100
CF Pollable mandatory............................ Disabled
CF Poll Request mandatory........................ Disabled
CFP Period....................................... 4
CFP Maximum Duration............................. 60
Default Channel.................................. 36
Default Tx Power Level........................... 1
DTPC Status..................................... Enabled
Fragmentation Threshold.......................... 2346
RSSI Low Check................................... Disabled
RSSI Threshold................................... -80
TI Threshold..................................... -50
Legacy Tx Beamforming setting.................... Disabled
Traffic Stream Metrics Status.................... Disabled
Expedited BW Request Status...................... Disabled
World Mode....................................... Enabled
dfs-peakdetect................................... Enabled
EDCA profile type................................ default-wmm
Voice MAC optimization status.................... Disabled
Call Admission Control (CAC) configuration
Voice AC:
Voice AC - Admission control (ACM)............ Disabled
Voice Stream-Size............................. 84000
Voice Max-Streams............................. 2
Voice max RF bandwidth........................ 75
Voice reserved roaming bandwidth.............. 6
Voice CAC Method ............................. Load-Based
Voice tspec inactivity timeout................ Disabled
CAC SIP-Voice configuration
SIP based CAC ................................ Disabled
SIP Codec Type ............................... CODEC_TYPE_G711
SIP call bandwidth ........................... 64
SIP call bandwith sample-size ................ 20
Video AC:
Video AC - Admission control (ACM)............ Disabled
Video max RF bandwidth........................ 0
Video reserved roaming bandwidth.............. 0
Video load-based CAC mode..................... Disabled
Video CAC Method ............................. Static
CAC SIP-Video Configuration
SIP based CAC ................................ Disabled
Best-effort AC - Admission control (ACM)...... Disabled
Background AC - Admission control (ACM)....... Disabled
Maximum Number of Clients per AP Radio........... 200
Help: execute the command "show 802.11a"
Prompt: - cisco_wlc_ssh> - cisco_wlc_ssh#
show 802.11a cleanair config¶
Output:
Clean Air Solution............................... Disabled
Air Quality Settings:
Air Quality Reporting........................ Enabled
Air Quality Reporting Period (min)........... 15
Air Quality Alarms........................... Enabled
Air Quality Alarm Threshold................ 35
Unclassified Interference.................. Disabled
Unclassified Severity Threshold............ 20
Interference Device Settings:
Interference Device Reporting................ Enabled
Interference Device Types:
TDD Transmitter.......................... Enabled
Jammer................................... Enabled
Continuous Transmitter................... Enabled
DECT-like Phone.......................... Enabled
Video Camera............................. Enabled
WiFi Inverted............................ Enabled
WiFi Invalid Channel..................... Enabled
SuperAG.................................. Enabled
Canopy................................... Enabled
WiMax Mobile............................. Enabled
WiMax Fixed.............................. Enabled
Interference Device Alarms................... Enabled
Interference Device Types Triggering Alarms:
TDD Transmitter.......................... Disabled
Jammer................................... Enabled
Continuous Transmitter................... Disabled
DECT-like Phone.......................... Disabled
Video Camera............................. Disabled
WiFi Inverted............................ Enabled
WiFi Invalid Channel..................... Enabled
SuperAG.................................. Disabled
Canopy................................... Disabled
WiMax Mobile............................. Disabled
WiMax Fixed.............................. Disabled
Additional Clean Air Settings:
CleanAir ED-RRM State........................ Disabled
CleanAir ED-RRM Sensitivity.................. Medium
CleanAir ED-RRM Custom Threshold............. 50
CleanAir Rogue Contribution.................. Disabled
CleanAir Rogue Duty-Cycle Threshold.......... 80
CleanAir Persistent Devices state............ Disabled
CleanAir Persistent Device Propagation....... Disabled
Help: execute the command "show 802.11a cleanair config"
Prompt: - cisco_wlc_ssh> - cisco_wlc_ssh#
show advanced 802.11a channel¶
Output:
Leader Automatic Channel Assignment
Channel Assignment Mode........................ OFF
Channel Update Interval........................ 600 seconds
Anchor time (Hour of the day).................. 0
Update Contribution
Noise........................................ Enable
Interference................................. Enable
Load......................................... Disable
Device Aware................................. Disable
CleanAir Event-driven RRM option............... Disabled
Channel Assignment Leader...................... Cisco_lab (192.168.1.11) (::)
Last Run....................................... 448 seconds ago
Last Run Time.................................. 0 seconds
DCA Sensitivity Level.......................... MEDIUM (15 dB)
DCA 802.11n/ac Channel Width................... 20 MHz
DCA Minimum Energy Limit....................... -95 dBm
Channel Energy Levels
Minimum...................................... unknown
Average...................................... unknown
Maximum...................................... unknown
Channel Dwell Times
Minimum...................................... unknown
Average...................................... unknown
Maximum...................................... unknown
802.11a 5 GHz Auto-RF Channel List
Allowed Channel List......................... 36,40,44,48,52,56,60,64,100,
104,108,112,116,120,124,128,
132,136,140,144,149,153,157,
161
Unused Channel List.......................... 165
802.11a 4.9 GHz Auto-RF Channel List
Allowed Channel List.........................
Unused Channel List.......................... 1,2,3,4,5,6,7,8,9,10,11,12,
13,14,15,16,17,18,19,20,21,
22,23,24,25,26
DCA Outdoor AP option.......................... Disabled
Help: execute the command "show advanced 802.11a channel"
Prompt: - cisco_wlc_ssh> - cisco_wlc_ssh#
show ap config general¶
Output:
Cisco AP Identifier.............................. 111
Cisco AP Name.................................... AP_test_01
Country code..................................... IT - Italy
Regulatory Domain allowed by Country............. 802.11bg:-E 802.11a:-E
AP Country code.................................. IT - Italy
AP Regulatory Domain............................. -E
Switch Port Number .............................. 8
MAC Address...................................... 00:62:ec:01:02:03
IP Address Configuration......................... Static IP assigned
IP Address....................................... 10.1.1.1
IP NetMask....................................... 255.255.255.0
Gateway IP Addr.................................. 10.1.1.254
Domain...........................................
Name Server...................................... 192.168.1.1
NAT External IP Address.......................... None
CAPWAP Path MTU.................................. 1485
DHCP Release Override............................ Disabled
Telnet State..................................... Globally Enabled
Ssh State........................................ Globally Enabled
Cisco AP Location................................ default location
Cisco AP Floor Label............................. 0
Cisco AP Group Name.............................. GROUP_PE
Primary Cisco Switch Name........................ WLC
Primary Cisco Switch IP Address.................. 10.2.2.2
Secondary Cisco Switch Name......................
Secondary Cisco Switch IP Address................ Not Configured
Tertiary Cisco Switch Name.......................
Tertiary Cisco Switch IP Address................. Not Configured
Administrative State ............................ ADMIN_ENABLED
Operation State ................................. REGISTERED
Mirroring Mode .................................. Disabled
AP Mode ......................................... FlexConnect
Public Safety ................................... Disabled
AP SubMode ...................................... Not Configured
Rogue Detection ................................. Enabled
AP Vlan Trunking ................................ Enabled (Inherited)
AP Native Vlan ID: .............................. 1 (Inherited)
Remote AP Debug ................................. Disabled
Logging trap severity level ..................... emergencies
Logging syslog facility ......................... kern
S/W Version .................................... 8.2.164.0
Boot Version ................................... 15.2.4.5
Mini IOS Version ................................ 8.2.100.0
Stats Reporting Period .......................... 180
Stats Collection Mode ........................... normal
Radio Core Mode ................................. Disabled
Slub Debug Mode ................................. Disabled
LED State........................................ Enabled
PoE Pre-Standard Switch.......................... Disabled
PoE Power Injector MAC Addr...................... Disabled
Power Type/Mode.................................. PoE/Medium Power (15.4 W)
Number Of Slots.................................. 2
AP Model......................................... AIR-CAP2702E-E-K9
AP Image......................................... C2700-K9W8-M
IOS Version...................................... 15.3(3)JC9$
Reset Button..................................... Enabled
AP Serial Number................................. FCEDDCCBBAA
AP Certificate Type.............................. Manufacture Installed
AP LAG Configuration Status ..................... Disabled
LAG Support for AP .............................. No
Native Vlan Inheritance: ........................ AP
FlexConnect Vlan mode :.......................... Enabled
Native ID :..................................... 1
WLAN 13 :....................................... 3 (Wlan-Specific)
WLAN 46 :....................................... 13 (Wlan-Specific)
WLAN 70 :....................................... 254 (Wlan-Specific)
FlexConnect VLAN ACL Mappings
FlexConnect Group................................ Not a member of any group
Group VLAN ACL Mappings
Group VLAN Name to Id Mappings
Template in Modified State - apply it to see mappings
AP-Specific FlexConnect Policy ACLs :
L2Acl Configuration ............................. Not Available
FlexConnect Local-Split ACLs :
WLAN ID PROFILE NAME ACL TYPE
------- -------------------------------- --------------------------------- -------
Flexconnect Central-Dhcp Values :
WLAN ID PROFILE NAME Central-Dhcp DNS Override Nat-Pat Type
------- --------------------------------- -------------- -------------- --------- ------
13 WLAN_13 False False False Wlan
46 WLAN_46 False False False Wlan
70 WLAN_70 False False False Wlan
Flex AVC visibility Configurations..............
WlanId PROFILE NAME Inherit-level Visibility Flex Avc-profile
------- -------------------------------- ------------- ---------- --------------------------------
13 WLAN_13 wlan-spec disable none
46 WLAN_46 wlan-spec disable none
70 WLAN_70 wlan-spec enable none
FlexConnect Backup Auth Radius Servers :
Primary Radius Server........................... Disabled
Secondary Radius Server......................... Disabled
AP User Mode..................................... AUTOMATIC
AP User Name..................................... admin
AP Dot1x User Mode............................... Not Configured
AP Dot1x User Name............................... Not Configured
Cisco AP system logging host..................... 255.255.255.255
AP Up Time....................................... 248 days, 07 h 09 m 00 s
AP LWAPP Up Time................................. 165 days, 11 h 03 m 33 s
Join Date and Time............................... Wed Jan 17 10:07:12 2018
Join Taken Time.................................. 0 days, 00 h 05 m 36 s
Memory Type...................................... DDR3
Memory Size...................................... 11839 KBytes
CPU Type......................................... PowerPC CPU at 800Mhz, revision number 0x2151
Flash Type....................................... Onboard Flash
Flash Size....................................... 1564 KBytes
GPS Present...................................... NO
Ethernet Vlan Tag................................ Disabled
Ethernet Port Duplex............................. Auto
Ethernet Port Speed.............................. Auto
AP Link Latency.................................. Disabled
Rogue Detection.................................. Enabled
AP TCP MSS Adjust................................ Disabled
Hotspot Venue Group.............................. Unspecified
Hotspot Venue Type............................... Unspecified
DNS server IP ............................. 192.168.1.1
Help: execute the command "show ap config general"
Prompt: - cisco_wlc_ssh> - cisco_wlc_ssh#
show ap image all¶
Output:
Total number of APs.............................. 2
Number of APs
Initiated....................................... 0
Downloading..................................... 0
Predownloading.................................. 0
Completed predownloading........................ 0
Not Supported................................... 0
Failed to Predownload........................... 0
Predownload Predownload Flexconnect
AP Name Primary Image Backup Image Status Version Next Retry Time Retry Count Predownload
------------------ -------------- -------------- --------------- -------------- ---------------- ------------ --------------
ESP1-05-NAP01 8.5.161.0 0.0.0.0 None None NA NA
ESP1-05-NAP02 8.5.161.0 0.0.0.0 None None NA NA
Help: execute the command "show ap image all"
Prompt: - cisco_wlc_ssh> - cisco_wlc_ssh#
show ap summary¶
Output:
Number of APs.................................... 2
Global AP User Name.............................. admin
Global AP Dot1x User Name........................ Not Configured
Global AP Dot1x EAP Method....................... EAP-FAST
AP Name Slots AP Model Ethernet MAC Location Country IP Address Clients DSE Location
------------------------------ ----- -------------------- ----------------- -------------------- ---------- --------------- ------- --------------
2800-Default 3 AIR-AP2802I-E-K9 c0:ff:ee:c0:ff:ee default location IT 172.25.81.216 0 [0 ,0 ,0 ]
2700-Server 2 AIR-CAP2702E-E-K9 ca:fe:ca:fe:ca:fe Server room IT 172.25.81.221 0 [0 ,0 ,0 ]
Help: execute the command "show ap summary"
Prompt: - cisco_wlc_ssh> - cisco_wlc_ssh#
show band-select¶
Output:
Band Select Probe Response....................... per WLAN enabling
Cycle Count................................... 2 cycles
Cycle Threshold............................... 200 milliseconds
Age Out Suppression........................... 20 seconds
Age Out Dual Band............................. 60 seconds
Client RSSI................................... -80 dBm
Client Mid RSSI............................... -80 dBm
Help: execute the command "show band-select"
Prompt: - cisco_wlc_ssh> - cisco_wlc_ssh#
show boot¶
Output:
Primary Boot Image............................... 8.10.183.0 (default) (active)
Backup Boot Image................................ 8.8.125.0
Help: execute the command "show boot"
Prompt: - cisco_wlc_ssh> - cisco_wlc_ssh#
show cdp neighbors detail¶
Output:
-------------------------
Device ID: AAA.pizza.com(FXS1828Q2JH)
Entry address(es):
IP address: 1.2.3.4
Platform: N77-C7706, Capabilities: Router Switch IGMP
Interface: GigabitEthernet0/0/2, Port ID (outgoing port): Ethernet1/15
Holdtime : 127 sec
Version :
Cisco Nexus Operating System (NX-OS) Software, Version 6.2(10)
Advertisement version: 2
Duplex: Full
-------------------------
Device ID: BBB.beer.com
Entry address(es):
IP address: 172.5.6.7
Platform: cisco WS-C3750G-12S, Capabilities: Router Switch IGMP
Interface: GigabitEthernet0/0/7, Port ID (outgoing port): GigabitEthernet1/0/11
Holdtime : 162 sec
Version :
Cisco IOS Software, C3750 Software (C3750-IPSERVICESK9-M), Version 12.2(55)SE11, RELEASE SOFTWARE (fc3) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2016 by Cisco Systems, Inc. Compiled Wed 17-Aug-16 13:28 by prod_rel_team
Advertisement version: 2
Duplex: Full
-------------------------
Device ID: CCC.cake.com
Entry address(es):
IP address: 172.9.10.11
Platform: cisco WS-C3750G-12S, Capabilities: Router Switch IGMP
Interface: GigabitEthernet0/0/8, Port ID (outgoing port): GigabitEthernet1/0/1
Holdtime : 162 sec
Version :
Cisco IOS Software, C3750 Software (C3750-IPSERVICESK9-M), Version 12.2(55)SE11, RELEASE SOFTWARE (fc3) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2016 by Cisco Systems, Inc. Compiled Wed 17-Aug-16 13:28 by prod_rel_team
Advertisement version: 2
Duplex: Full
Help: execute the command "show cdp neighbors detail"
Prompt: - cisco_wlc_ssh> - cisco_wlc_ssh#
show client detail¶
Output:
Client MAC Address...............................04:67:f8:63:2a:cfb
Client Username ................................. N/A
AP MAC Address................................... 10:e0:1d:f0:86:91
AP Name.......................................... APf-16
AP radio slot Id................................. 1
Client State..................................... Associated
Client User Group................................
Client NAC OOB State............................. Access
Wireless LAN Id.................................. 4
Wireless LAN Network Name (SSID)................. SINGLE
Wireless LAN Profile Name........................ device
Hotspot (802.11u)................................ Not Supported
BSSID............................................ 80:e0:1d:f0:88:9a
Connected For ................................... 15688 secs
Channel.......................................... 157
IP Address....................................... 10.10.10.110
Gateway Address.................................. Unknown
Netmask.......................................... Unknown
Association Id................................... 14
Authentication Algorithm......................... Open System
Reason Code...................................... 1
Status Code...................................... 0
Session Timeout.................................. 28800
Client CCX version............................... No CCX support
QoS Level........................................ Silver
Avg data Rate.................................... 0
Burst data Rate.................................. 0
Avg Real time data Rate.......................... 0
Burst Real Time data Rate........................ 0
802.1P Priority Tag.............................. disabled
CTS Security Group Tag........................... Not Applicable
KTS CAC Capability............................... No
Qos Map Capability............................... No
WMM Support...................................... Enabled
APSD ACs....................................... BK BE VI VO
Current Rate..................................... m8 ss2
Supported Rates.................................. 18.0,24.0,36.0,48.0,54.0
Mobility State................................... Local
Mobility Move Count.............................. 0
Security Policy Completed........................ Yes
Policy Manager State............................. RUN
Audit Session ID................................. 05964b0a0014fc2acc4c7e5c
AAA Role Type.................................... none
Local Policy Applied............................. none
IPv4 ACL Name.................................... none
FlexConnect ACL Applied Status................... Unavailable
IPv4 ACL Applied Status.......................... Unavailable
IPv6 ACL Name.................................... none
IPv6 ACL Applied Status.......................... Unavailable
Layer2 ACL Name.................................. none
Layer2 ACL Applied Status........................ Unavailable
Client Type...................................... SimpleIP
mDNS Status...................................... Enabled
mDNS Profile Name................................ default-mdns-profile
No. of mDNS Services Advertised.................. 0
Policy Type...................................... WPA2
Authentication Key Management.................... PSK
Encryption Cipher................................ CCMP (AES)
Protected Management Frame ...................... No
Management Frame Protection...................... No
EAP Type......................................... Unknown
Interface........................................ qa_mobile
VLAN............................................. 218
Quarantine VLAN.................................. 0
Access VLAN...................................... 218
Local Bridging VLAN.............................. 218
Client Capabilities:
CF Pollable................................ Not implemented
CF Poll Request............................ Not implemented
Short Preamble............................. Not implemented
PBCC....................................... Not implemented
Channel Agility............................ Not implemented
Listen Interval............................ 20
Fast BSS Transition........................ Not implemented
11v BSS Transition......................... Not implemented
Client Wifi Direct Capabilities:
WFD capable................................ No
Manged WFD capable......................... No
Cross Connection Capable................... No
Support Concurrent Operation............... No
Fast BSS Transition Details:
Client Statistics:
Number of Bytes Received................... 78808
Number of Bytes Sent....................... 585125
Total Number of Bytes Sent................. 585125
Total Number of Bytes Recv................. 78808
Number of Bytes Sent (last 90s)............ 64
Number of Bytes Recv (last 90s)............ 292
Number of Packets Received................. 761
Number of Packets Sent..................... 763
Number of Interim-Update Sent.............. 0
Number of EAP Id Request Msg Timeouts...... 0
Number of EAP Id Request Msg Failures...... 0
Number of EAP Request Msg Timeouts......... 0
Number of EAP Request Msg Failures......... 0
Number of EAP Key Msg Timeouts............. 0
Number of EAP Key Msg Failures............. 0
Number of Data Retries..................... 317
Number of RTS Retries...................... 0
Number of Duplicate Received Packets....... 4
Number of Decrypt Failed Packets........... 0
Number of Mic Failured Packets............. 0
Number of Mic Missing Packets.............. 0
Number of RA Packets Dropped............... 0
Number of Policy Errors.................... 0
Radio Signal Strength Indicator............ -51 dBm
Signal to Noise Ratio...................... 43 dB
Client Rate Limiting Statistics:
Number of Data Packets Received............ 0
Number of Data Rx Packets Dropped.......... 0
Number of Data Bytes Received.............. 0
Number of Data Rx Bytes Dropped............ 0
Number of Realtime Packets Received........ 0
Number of Realtime Rx Packets Dropped...... 0
Number of Realtime Bytes Received.......... 0
Number of Realtime Rx Bytes Dropped........ 0
Number of Data Packets Sent................ 0
Number of Data Tx Packets Dropped.......... 0
Number of Data Bytes Sent.................. 0
Number of Data Tx Bytes Dropped............ 0
Number of Realtime Packets Sent............ 0
Number of Realtime Tx Packets Dropped...... 0
Number of Realtime Bytes Sent.............. 0
Number of Realtime Tx Bytes Dropped........ 0
Nearby AP Statistics:
AP2F-29(slot 0)
antenna0: 6 secs ago..................... -72 dBm
antenna1: 6 secs ago..................... -75 dBm
AP2F-29(slot 1)
antenna0: 5 secs ago..................... -77 dBm
antenna1: 5 secs ago..................... -80 dBm
AP2F-23(slot 0)
antenna0: 5 secs ago..................... -86 dBm
antenna1: 5 secs ago..................... -87 dBm
AP2F-23(slot 1)
antenna0: 6 secs ago..................... -90 dBm
antenna1: 6 secs ago..................... -91 dBm
AP3f-10(slot 1)
antenna0: 3 secs ago..................... -78 dBm
antenna1: 3 secs ago..................... -79 dBm
AP3f-11(slot 1)
antenna0: 5 secs ago..................... -78 dBm
antenna1: 5 secs ago..................... -82 dBm
AP3f-17(slot 0)
antenna0: 6 secs ago..................... -57 dBm
antenna1: 6 secs ago..................... -60 dBm
AP3f-17(slot 1)
antenna0: 6 secs ago..................... -60 dBm
antenna1: 6 secs ago..................... -57 dBm
AP2F-27(slot 1)
antenna0: 6 secs ago..................... -83 dBm
antenna1: 6 secs ago..................... -80 dBm
AP3f-13(slot 0)
antenna0: 6 secs ago..................... -72 dBm
antenna1: 6 secs ago..................... -76 dBm
AP3f-13(slot 1)
antenna0: 6 secs ago..................... -74 dBm
antenna1: 6 secs ago..................... -70 dBm
AP3f-12(slot 0)
antenna0: 5 secs ago..................... -79 dBm
antenna1: 5 secs ago..................... -79 dBm
AP3f-12(slot 1)
antenna0: 6 secs ago..................... -74 dBm
antenna1: 6 secs ago..................... -75 dBm
AP2F-28(slot 0)
antenna0: 5 secs ago..................... -86 dBm
antenna1: 5 secs ago..................... -87 dBm
AP2F-28(slot 1)
antenna0: 5 secs ago..................... -88 dBm
antenna1: 5 secs ago..................... -82 dBm
AP2F-25(slot 1)
antenna0: 6 secs ago..................... -87 dBm
antenna1: 6 secs ago..................... -88 dBm
AP3f-15(slot 0)
antenna0: 6 secs ago..................... -74 dBm
antenna1: 6 secs ago..................... -71 dBm
AP3f-15(slot 1)
antenna0: 6 secs ago..................... -77 dBm
antenna1: 6 secs ago..................... -69 dBm
AP3f-14(slot 1)
antenna0: 6 secs ago..................... -73 dBm
antenna1: 6 secs ago..................... -71 dBm
AP3f-16(slot 0)
antenna0: 6 secs ago..................... -67 dBm
antenna1: 6 secs ago..................... -65 dBm
AP3f-16(slot 1)
antenna0: 6 secs ago..................... -51 dBm
antenna1: 6 secs ago..................... -57 dBm
DNS Server details:
DNS server IP ............................. 0.0.0.0
DNS server IP ............................. 0.0.0.0
Assisted Roaming Prediction List details:
Client Dhcp Required: False
Allowed (URL)IP Addresses
-------------------------
AVC Profile Name: ............................... Internal Wireless AVC
Help: execute the command "show client detail"
Prompt: - cisco_wlc_ssh> - cisco_wlc_ssh#
show exclusionlist¶
Output:
Manually Disabled Clients
-------------------------
MAC Address Description
----------------------- --------------------------------
aa:bb:cc:dd:ee:ff bad-guy
00:22:43:cc:ac:2d request #6aa493
34:f6:aa:7e:70:3e ticket #612333
40:b0:34:99:95:d9 Unkown Device
No dynamically excluded clients.
Help: execute the command "show exclusionlist"
Prompt: - cisco_wlc_ssh> - cisco_wlc_ssh#
show flexconnect group summary¶
Output:
FlexConnect Group Summary: Count: 4
Group Name # Aps
-------------------- --------
FlexCon Group - Grp1 44
FlexCon Group - Grp2 14
default-flex-group 0
default-flex-group-1826280552 0
Help: execute the command "show flexconnect group summary"
Prompt: - cisco_wlc_ssh> - cisco_wlc_ssh#
show interface detailed id¶
Output:
Interface Name................................... my-interface
MAC Address...................................... c0:12:43:56:78:90
IP Address....................................... 8.8.8.8
IP Netmask....................................... 255.255.254.0
IP Gateway....................................... 8.8.8.1
External NAT IP State............................ Disabled
External NAT IP Address.......................... 0.0.0.0
Link Local IPv6 Address.......................... fe80::c012:4356:7890:5643/64
STATE ........................................... NONE
IPv6 Address..................................... ::/128
STATE ........................................... NONE
IPv6 Gateway..................................... ::
IPv6 Gateway Mac Address......................... 00:00:00:00:00:00
STATE ........................................... NONE
VLAN............................................. 300
Quarantine-vlan.................................. 0
NAS-Identifier................................... none
Active Physical Port............................. LAG (13)
Primary Physical Port............................ LAG (13)
Backup Physical Port............................. Unconfigured
DHCP Proxy Mode.................................. Global
Primary DHCP Server.............................. 1.1.1.1
Secondary DHCP Server............................ 1.1.1.2
DHCP Option 82................................... Disabled
DHCP Option 82 bridge mode insertion............. Disabled
DHCP Option 6 Opendns Override................... Disabled
IPv4 ACL......................................... Unconfigured
mDNS Profile Name................................ Unconfigured
AP Manager....................................... No
Guest Interface.................................. No
3G VLAN.......................................... Disabled
L2 Multicast..................................... Enabled
Help: execute the command "show interface detailed id"
Prompt: - cisco_wlc_ssh> - cisco_wlc_ssh#
show interface group summary¶
Output:
Interface Group Name Total Interfaces Total Wlans Total AP Groups Quarantine
-------------------------------- ---------------- ----------- --------------- ----------
intgrp_guest 1 1 2 No
intgrp_prod 1 1 6 No
intgrp_byod 1 2 11 No
Help: execute the command "show interface group summary"
Prompt: - cisco_wlc_ssh> - cisco_wlc_ssh#
show interface summary¶
Output:
Number of Interfaces.......................... 3
Interface Name Port Vlan Id IP Address Type Ap Mgr Guest
-------------------------------- ---- -------- --------------- ------- ------ -----
management 1 untagged 192.168.1.11 Static Yes N/A
service-port N/A N/A 11.1.1.1 Static No N/A
virtual N/A N/A 1.1.1.1 Static No N/A
Help: execute the command "show interface summary"
Prompt: - cisco_wlc_ssh> - cisco_wlc_ssh#
show inventory¶
Output:
Burned-in MAC Address............................ 70:1F:53:12:34:56
Maximum number of APs supported.................. 150
NAME: "Chassis" , DESCR: "Cisco 3500 Series Wireless LAN Controller"
PID: AIR-CT3504-K9, VID: V01, SN: ABC1234D567
Help: execute the command "show inventory"
Prompt: - cisco_wlc_ssh> - cisco_wlc_ssh#
show mobility anchor¶
Output:
Mobility Anchor Export List
Priority number, 1=Highest priority and 3=Lowest priority(default).
WLAN ID IP Address Status Priority
------- --------------- ------ --------
12 10.0.0.211 Up 3
12 10.0.0.212 Up 2
13 10.0.0.212 Up 2
13 10.0.0.213 Up 1
GLAN ID IP Address Status
------- --------------- ------
99 192.168.180.1 Down
Help: execute the command "show mobility anchor"
Prompt: - cisco_wlc_ssh> - cisco_wlc_ssh#
show mobility sum¶
Output:
Mobility Protocol Port........................... 16666
Default Mobility Domain.......................... data
Multicast Mode .................................. Disabled
Mobility Domain ID for 802.11r................... 0xb187
Mobility Keepalive Interval...................... 10
Mobility Keepalive Count......................... 3
Mobility Group Members Configured................ 2
Mobility Control Message DSCP Value.............. 0
Controllers configured in the Mobility Group
MAC Address IP Address Group Name Multicast IP Status
08:00:27:0a:04:25 192.168.1.12 data 0.0.0.0 Control and Data Path Down
08:00:27:1d:a4:d4 192.168.1.11 data 0.0.0.0 Up
Help: execute the command "show mobility sum"
Prompt: - cisco_wlc_ssh> - cisco_wlc_ssh#
show port summary¶
Output:
STP Admin Physical Physical Link Link
Pr Type Stat Mode Mode Status Status Trap POE
-- ------- ---- ------- ---------- ---------- ------ ------- ---------
1 Normal Forw Enable Auto 1000 Full Up Enable N/A
2 Normal Disa Disable Auto Auto Down Enable N/A
3 Normal Disa Disable Auto Auto Down Enable Disable
4 Normal Forw Enable Auto 1000 Full Up Enable Enable (Power Off)
5 Normal Disa Enable Auto Auto Down Enable N/A
RP Normal Forw Enable Auto Auto Up Enable N/A
SP Normal Disa Enable Auto Auto Down Enable N/A
Help: execute the command "show port summary"
Prompt: - cisco_wlc_ssh> - cisco_wlc_ssh#
show radius summary¶
Output:
Vendor Id Backward Compatibility................. Disabled
Call Station Id Case............................. lower
Accounting Call Station Id Type.................. Mac Address
Auth Call Station Id Type........................ AP's Radio MAC Address:SSID
Extended Source Ports Support.................... Enabled
Aggressive Failover.............................. Disabled
Keywrap.......................................... Disabled
Fallback Test:
Test Mode.................................... Passive
Probe User Name.............................. cisco-probe
Interval (in seconds)........................ 300
MAC Delimiter for Authentication Messages........ hyphen
MAC Delimiter for Accounting Messages............ hyphen
RADIUS Authentication Framed-MTU................. 1300 Bytes
Authentication Servers
Idx Type Server Address Port State Tout MgmtTout RFC3576 IPSec - state/Profile Name/RadiusRegionString
--- ---- ---------------- ------ -------- ---- -------- ------- -------------------------------------------------------
3 * NM 10.255.255.24 1812 Enabled 5 5 Disabled Disabled - /none
4 * NM 10.255.255.25 1812 Enabled 5 5 Disabled Disabled - /none
Accounting Servers
Idx Type Server Address Port State Tout MgmtTout RFC3576 IPSec - state/Profile Name/RadiusRegionString
--- ---- ---------------- ------ -------- ---- -------- ------- -------------------------------------------------------
3 * N 10.255.255.26 1813 Enabled 5 5 N/A Disabled - /none
4 * N 10.255.255.27 1813 Enabled 5 5 N/A Disabled - /none
Help: execute the command "show radius summary"
Prompt: - cisco_wlc_ssh> - cisco_wlc_ssh#
show redundancy detail¶
Output:
Redundancy Management IP Address................. 10.128.1.2
Peer Redundancy Management IP Address............ 10.128.1.3
Redundancy Port IP Address....................... 169.254.1.2
Peer Redundancy Port IP Address.................. 169.254.1.3
Peer Service Port IP Address..................... 0.0.0.0
Switchover History[1]:
Previous Active = 10.128.1.3, Current Active = 10.128.1.2
Switchover Reason = Active controller failed, Switchover Time = Tue Nov 24 19:24:43 2020
Redundancy Timeout Values.....:
----------------------------------------------------
Keep Alive Timeout : 100 msecs
Peer Search Timeout : 120 secs
Number of Routes................................. 0
Destination Network Netmask Gateway
------------------- ------------------- -------------------
Help: execute the command "show redundancy detail"
Prompt: - cisco_wlc_ssh> - cisco_wlc_ssh#
show redundancy summary¶
Output:
Redundancy Mode = SSO ENABLED
Local State = ACTIVE
Peer State = STANDBY HOT
Unit = Primary
Unit ID = 00:00:00:00:12:34
Redundancy State = SSO
Mobility MAC = 00:00:00:00:12:34
Redundancy Port = UP
BulkSync Status = Complete
Average Redundancy Peer Reachability Latency = 199 Micro Seconds
Average Management Gateway Reachability Latency = 570 Micro Seconds
Help: execute the command "show redundancy summary"
Prompt: - cisco_wlc_ssh> - cisco_wlc_ssh#
show rf-profile summary¶
Output:
Number of RF Profiles............................ 9
Out Of Box State................................. Disabled
Out Of Box Persistence........................... Disabled
RF Profile Name Band Description 11n-client-only Applied
--------------------------------- ------- ----------------------------------- ------------------ ----------
High-Client-Density-802.11a 5 GHz <none> disable No
High-Client-Density-802.11bg 2.4 GHz <none> disable No
Low-Client-Density-802.11a 5 GHz <none> disable No
Low-Client-Density-802.11bg 2.4 GHz <none> disable No
Typical-Client-Density-802.11a 5 GHz <none> disable No
Typical-Client-Density-802.11bg 2.4 GHz <none> disable No
VSW_OFFICE 5 GHz <none> disable Yes
VSW_OUTDOOR 5 GHz <none> disable Yes
VSW_WAREHOUSE 5 GHz <none> disable Yes
Help: execute the command "show rf-profile summary"
Prompt: - cisco_wlc_ssh> - cisco_wlc_ssh#
show stats port summary¶
Output:
Link Pkts In Pkts In Pkts Out
Pr Status Pkts In Pkts Out Bcast Errors Errors Collisions
-- ------ ------- ------- ------- ------- ------- ----------
1 Up 2364509905 2472568024 66473417 0 0 0
2 Down 0 0 0 0 0 0
3 Down 0 0 0 0 0 0
4 Up 335582045 124686415 3515026 0 0 0
5 Down 0 0 0 0 0 0
Total 2700091950 2597254439 69988443 0 0 0
Help: execute the command "show stats port summary"
Prompt: - cisco_wlc_ssh> - cisco_wlc_ssh#
show sysinfo¶
Output:
Manufacturer's Name.............................. Cisco Systems Inc.
Product Name..................................... Cisco Controller
Product Version.................................. 7.4.110.0
Bootloader Version............................... 1.0.16
Field Recovery Image Version..................... 1.0.0
Firmware Version................................. PIC 15.0
Build Type....................................... DATA + WPS
System Name...................................... TEST-WLC
System Location..................................
System Contact...................................
System ObjectID.................................. 1.3.6.1.4.1.9.1.1279
IP Address....................................... 192.0.2.5
Last Reset....................................... Power on reset
System Up Time................................... 109 days 16 hrs 33 mins 12 secs
System Timezone Location.........................
System Stats Realtime Interval................... 5
System Stats Normal Interval..................... 180
Configured Country............................... AU - Australia
Operating Environment............................ Commercial (0 to 40 C)
Internal Temp Alarm Limits....................... 0 to 65 C
Internal Temperature............................. +31 C
External Temperature............................. +35 C
Fan Status....................................... 3960 rpm
State of 802.11b Network......................... Enabled
State of 802.11a Network......................... Enabled
Number of WLANs.................................. 6
Number of Active Clients......................... 20
Memory Current Usage............................. Unknown
Memory Average Usage............................. Unknown
CPU Current Usage................................ Unknown
CPU Average Usage................................ Unknown
Burned-in MAC Address............................ D0:C2:82:11:22:33
Maximum number of APs supported.................. 25
Help: execute the command "show sysinfo"
Prompt: - cisco_wlc_ssh> - cisco_wlc_ssh#
show tacacs summary¶
Output:
Fallback Test:
Interval (in seconds)........................ 0
Authentication Servers
Idx Server Address Port State Tout MgmtTout
--- ---------------------- ------ ------- ----- --------
1 10.255.255.24 49 Enabled 5 5
2 10.255.255.25 49 Enabled 5 5
3 10.255.255.124 49 Enabled 5 5
Authorization Servers
Idx Server Address Port State Tout MgmtTout
--- ---------------------- ------ ------- ----- --------
1 10.255.255.26 49 Enabled 5 5
2 10.255.255.27 49 Enabled 5 5
3 10.255.255.126 49 Enabled 5 5
Accounting Servers
Idx Server Address Port State Tout MgmtTout
--- ---------------------- ------ ------- ----- --------
1 10.255.255.28 49 Enabled 5 5
2 10.255.255.29 49 Enabled 5 5
3 10.255.255.128 49 Enabled 5 5
Help: execute the command "show tacacs summary"
Prompt: - cisco_wlc_ssh> - cisco_wlc_ssh#
show time¶
Output:
Time............................................. Tue Dec 22 11:02:42 2020
Timezone delta................................... 0:0
Timezone location................................ (GMT -5:00) Eastern Time (US and Canada)
NTP Servers
NTP Version.................................. 3
NTP Polling Interval......................... 72000
Index NTP Key Index NTP Server Status NTP Msg Auth Status
------- ---------------------------------------------------------------------
1 0 1.1.1.1 In Sync AUTH DISABLED
2 0 128.138.141.172 Not Tried AUTH DISABLED
Help: execute the command "show time"
Prompt: - cisco_wlc_ssh> - cisco_wlc_ssh#
show wlan sum¶
Output:
Number of WLANs.................................. 3
WLAN ID WLAN Profile Name / SSID Status Interface Name PMIPv6 Mobility
------- ----------------------------------------------------------------------- -------- -------------------- ---------------
17 Test_lab / Test_lab Enabled office_wireless none
18 Public_lab / Public_lab Enabled publicwifi none
19 C_Fabric_test / C_Fabric_test Disabled management none
Help: execute the command "show wlan sum"
Prompt: - cisco_wlc_ssh> - cisco_wlc_ssh#
default¶
Output:
% Invalid input detected
Help: default output for unknown commands
Prompt: - cisco_wlc_ssh> - cisco_wlc_ssh#