linux¶
Warning
This is automatically generated. In case of any issues, please refer to the source code or, even better, open an issue on the GitHub repository. Thanks! 🤗📖
Commands¶
enable¶
Output: None
Help: enter enable mode
Prompt: - linux$
ip vrf show¶
Output:
Name Table
-----------------------
vrf-blue 10
vrf-red 20
Help: execute the command "ip vrf show"
Prompt: - linux$ - linux#
ip address show¶
Output:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
2: ens32: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP group default qlen 1000
link/ether 00:0c:29:56:07:1b brd ff:ff:ff:ff:ff:ff
inet 192.168.131.128/24 brd 192.168.131.255 scope global dynamic ens32
valid_lft 1307sec preferred_lft 1307sec
3: gpd0: <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP> mtu 1400 qdisc fq_codel state UNKNOWN group default qlen 500
link/none
inet 10.20.20.12/32 scope global gpd0
valid_lft forever preferred_lft forever
4: br-218f5e637867: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN group default
link/ether 02:42:5d:d7:c2:c1 brd ff:ff:ff:ff:ff:ff
inet 172.21.0.1/16 brd 172.21.255.255 scope global br-218f5e637867
valid_lft forever preferred_lft forever
5: vrf-blue: <NOARP,MASTER,UP,LOWER_UP> mtu 65575 qdisc noqueue state UP group default qlen 1000
link/ether ee:be:e9:28:70:69 brd ff:ff:ff:ff:ff:ff
6: brblue: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master vrf-blue state UNKNOWN group default qlen 1000
link/ether 66:37:23:9b:9e:e4 brd ff:ff:ff:ff:ff:ff
inet 10.0.0.1/24 scope global brblue
valid_lft forever preferred_lft forever
inet 192.168.0.1/25 scope global brred
valid_lft forever preferred_lft forever
Help: execute the command "ip address show"
Prompt: - linux$ - linux#
ip link show¶
Output:
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: ens32: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc fq_codel state UP mode DEFAULT group default qlen 1000
link/ether 00:0c:29:56:07:1b brd ff:ff:ff:ff:ff:ff
3: gpd0: <POINTOPOINT,MULTICAST,NOARP,UP,LOWER_UP> mtu 1400 qdisc fq_codel state UNKNOWN mode DEFAULT group default qlen 500
link/none
4: br-218f5e637867: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue state DOWN mode DEFAULT group default
link/ether 02:42:5d:d7:c2:c1 brd ff:ff:ff:ff:ff:ff
5: vrf-blue: <NOARP,MASTER,UP,LOWER_UP> mtu 65575 qdisc noqueue state UP mode DEFAULT group default qlen 1000
link/ether ee:be:e9:28:70:69 brd ff:ff:ff:ff:ff:ff
6: vrf-red: <NOARP,MASTER,UP,LOWER_UP> mtu 65575 qdisc noqueue state UP mode DEFAULT group default qlen 1000
link/ether d6:a6:dd:0d:d5:f9 brd ff:ff:ff:ff:ff:ff
7: brblue: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master vrf-blue state UNKNOWN mode DEFAULT group default qlen 1000
link/ether 66:37:23:9b:9e:e4 brd ff:ff:ff:ff:ff:ff
8: brred: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master vrf-red state UNKNOWN mode DEFAULT group default qlen 1000
link/ether da:ca:17:97:f5:34 brd ff:ff:ff:ff:ff:ff
Help: execute the command "ip link show"
Prompt: - linux$ - linux#
arp -a¶
Output:
? (192.168.13.197) at 00:04:4b:cc:9c:ba [ether] on eth1.100
? (192.168.10.100) at <incomplete> on eth1.10
? (192.168.13.252) at 5c:e2:8c:fc:a4:74 [ether] on eth1.100
esxi (192.168.13.5) at 00:e0:67:05:9d:5a [ether] on eth1.100
? (192.168.13.253) at dc:f7:19:cd:d6:c4 [ether] on eth1.100
? (192.168.123.199) at 00:0f:c9:0e:c8:ec [ether] on eth0.21
? (192.168.10.52) at <incomplete> on eth1.10
? (192.168.10.7) at 00:0c:29:02:3b:93 [ether] on eth1.10
? (192.168.10.249) at 00:0c:29:bb:5f:a2 [ether] on eth1.10
Help: execute the command "arp -a"
Prompt: - linux$ - linux#
ip route show¶
Output:
default via 10.0.0.4 dev brblue
unreachable default metric 4278198272
broadcast 10.0.0.0 dev brblue proto kernel scope link src 10.0.0.1
10.0.0.0/24 dev brblue proto kernel scope link src 10.0.0.1
local 10.0.0.1 dev brblue proto kernel scope host src 10.0.0.1
broadcast 10.0.0.255 dev brblue proto kernel scope link src 10.0.0.1
192.168.0.0/24 via 10.0.0.2 dev brblue
192.168.131.2 dev ens32 proto dhcp scope link src 192.168.131.128 metric 100
Help: execute the command "ip route show"
Prompt: - linux$ - linux#
bluetoothctl show¶
Output:
Controller AA:AA:AA:AA:AA:AA (public)
Manufacturer: 0x005d (93)
Version: 0x0a (10)
Name: ntc-AA-AAAA
Alias: ntc-AA-AAAA
Class: 0x00000000 (0)
Powered: no
Discoverable: no
DiscoverableTimeout: 0x000000b4 (180)
Pairable: yes
UUID: Message Notification Se.. (00001133-0000-1000-8000-00805f9b34fb)
UUID: A/V Remote Control (0000110e-0000-1000-8000-00805f9b34fb)
UUID: OBEX Object Push (00001105-0000-1000-8000-00805f9b34fb)
UUID: Message Access Server (00001132-0000-1000-8000-00805f9b34fb)
UUID: PnP Information (00001200-0000-1000-8000-00805f9b34fb)
UUID: IrMC Sync (00001104-0000-1000-8000-00805f9b34fb)
UUID: Vendor specific (00005005-0000-1000-8000-0002ee000001)
UUID: A/V Remote Control Target (0000110c-0000-1000-8000-00805f9b34fb)
UUID: Generic Attribute Profile (00001801-0000-1000-8000-00805f9b34fb)
UUID: Phonebook Access Server (0000112f-0000-1000-8000-00805f9b34fb)
UUID: Audio Sink (0000110b-0000-1000-8000-00805f9b34fb)
UUID: Device Information (0000180a-0000-1000-8000-00805f9b34fb)
UUID: Generic Access Profile (00001800-0000-1000-8000-00805f9b34fb)
UUID: Handsfree Audio Gateway (0000111f-0000-1000-8000-00805f9b34fb)
UUID: Audio Source (0000110a-0000-1000-8000-00805f9b34fb)
UUID: OBEX File Transfer (00001106-0000-1000-8000-00805f9b34fb)
UUID: Handsfree (0000111e-0000-1000-8000-00805f9b34fb)
Modalias: usb:v1D6Bp0246d0548
Discovering: no
Roles: central
Roles: peripheral
Advertising Features:
ActiveInstances: 0x00 (0)
SupportedInstances: 0x04 (4)
SupportedIncludes: tx-power
SupportedIncludes: appearance
SupportedIncludes: local-name
SupportedSecondaryChannels: 1M
SupportedSecondaryChannels: 2M
SupportedSecondaryChannels: Coded
Help: execute the command "bluetoothctl show"
Prompt: - linux$ - linux#
dmidecode -t bios¶
Output:
# dmidecode 1.12
SMBIOS 1.1 present.
Handle 0x0000, DMI type 0, 24 bytes
BIOS Information
Vendor: Dell
Version: O11
Release Date: 01/11/1011
Address: 0xA1110
Runtime Size: 111111 bytes
ROM Size: 2048 kB
Characteristics:
PCI is supported
PNP is supported
APM is supported
BIOS is upgradeable
BIOS shadowing is allowed
ESCD support is available
Boot from CD is supported
Selectable boot is supported
BIOS ROM is socketed
EDD is supported
Print screen service is supported (int 5h)
8042 keyboard services are supported (int 9h)
Serial services are supported (int 14h)
Printer services are supported (int 17h)
CGA/mono video services are supported (int 10h)
ACPI is supported
USB legacy is supported
Smart battery is supported
BIOS boot specification is supported
Function key-initiated network boot is supported
Targeted content distribution is supported
Help: execute the command "dmidecode -t bios"
Prompt: - linux$ - linux#
dmidecode -t memory¶
Output:
# dmidecode 1.11
SMBIOS 1.1 present.
Handle 0x001A, DMI type 11, 11 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: Multi-bit ECC
Maximum Capacity: 16 GB
Error Information Handle: Not Provided
Number Of Devices: 4
Handle 0x001A, DMI type 11, 11 bytes
Memory Device
Array Handle: 0x001A
Error Information Handle: No Error
Total Width: 10 bits
Data Width: 10 bits
Size: 1111 MB
Form Factor: DIMM
Set: 1
Locator: DIMM1A
Bank Locator: Not Specified
Type: DDR2
Type Detail: Synchronous
Speed: 1111 MHz
Manufacturer: Not Specified
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Rank: Unknown
Handle 0x001A, DMI type 11, 11 bytes
Memory Device
Array Handle: 0x001A
Error Information Handle: No Error
Total Width: Unknown
Data Width: Unknown
Size: No Module Installed
Form Factor: DIMM
Set: 1
Locator: DIMM1C
Bank Locator: Not Specified
Type: Reserved
Type Detail: Synchronous
Speed: Unknown
Manufacturer: Not Specified
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Rank: Unknown
Handle 0x001A, DMI type 11, 11 bytes
Memory Device
Array Handle: 0x001A
Error Information Handle: No Error
Total Width: Unknown
Data Width: Unknown
Size: No Module Installed
Form Factor: DIMM
Set: 1
Locator: DIMM1B
Bank Locator: Not Specified
Type: Reserved
Type Detail: Synchronous
Speed: Unknown
Manufacturer: Not Specified
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Rank: Unknown
Handle 0x001A, DMI type 11, 11 bytes
Memory Device
Array Handle: 0x001A
Error Information Handle: No Error
Total Width: Unknown
Data Width: Unknown
Size: No Module Installed
Form Factor: DIMM
Set: 1
Locator: DIMM1D
Bank Locator: Not Specified
Type: Reserved
Type Detail: Synchronous
Speed: Unknown
Manufacturer: Not Specified
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Rank: Unknown
Help: execute the command "dmidecode -t memory"
Prompt: - linux$ - linux#
dmidecode -t processor¶
Output:
# dmidecode 1.1
SMBIOS 1.1 present.
Handle 0x0004, DMI type 4, 42 bytes
Processor Information
Socket Designation: CPU 1
Type: Central Processor
Family: Core 2 Quad
Manufacturer: AMD
ID: AA AA AA AA AA AA AA AA
Signature: Type 0, Family 1, Model 2, Stepping 3
Flags:
FPU (Floating-point unit on-chip)
VME (Virtual mode extension)
DE (Debugging extension)
PSE (Page size extension)
TSC (Time stamp counter)
MSR (Model specific registers)
PAE (Physical address extension)
MCE (Machine check exception)
CX8 (CMPXCHG8 instruction supported)
APIC (On-chip APIC hardware supported)
SEP (Fast system call)
MTRR (Memory type range registers)
PGE (Page global enable)
MCA (Machine check architecture)
CMOV (Conditional move instruction supported)
PAT (Page attribute table)
PSE-36 (36-bit page size extension)
CLFSH (CLFLUSH instruction supported)
DS (Debug store)
ACPI (ACPI supported)
MMX (MMX technology supported)
FXSR (FXSAVE and FXSTOR instructions supported)
SSE (Streaming SIMD extensions)
SSE2 (Streaming SIMD extensions 2)
SS (Self-snoop)
HTT (Multi-threading)
TM (Thermal monitor supported)
PBE (Pending break enabled)
Version: Intel(R) AAAA(R) CPU A1111 @ 1.10GHz
Voltage: 1.2 V
External Clock: 133 MHz
Max Speed: 1100 MHz
Current Speed: 1100 MHz
Status: Populated, Enabled
Upgrade: Slot 1
L1 Cache Handle: 0x0001
L2 Cache Handle: 0x0002
L3 Cache Handle: 0x0003
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Core Count: 1
Core Enabled: 1
Thread Count: 1
Characteristics:
128-bit capable
Help: execute the command "dmidecode -t processor"
Prompt: - linux$ - linux#
dmidecode -t system¶
Output:
# dmidecode 1.11
SMBIOS 1.1 present.
Handle 0x0001, DMI type 1, 11 bytes
System Information
Manufacturer: HP
Product Name: ProG4 Deepseek G6
Version:
Serial Number: AA111100AA
UUID: 1111AA1A-AA1A-11A1-1AAA-A1111AAAA1AA
Wake-up Type: Power Switch
SKU Number: 000000-000
Family: Not Specified
Handle 0x0011, DMI type 12, 1 bytes
System Configuration Options
Option 1: Jumper settings can be described here.
Handle 0x0011, DMI type 11, 11 bytes
System Event Log
Area Length: 32 bytes
Header Start Offset: 0x0000
Header Length: 32 bytes
Data Start Offset: 0x0010
Access Method: General-purpose non-volatile data functions
Access Address: 0x0000
Status: Valid, Not Full
Change Token: 0x0000001D
Header Format: Type 1
Supported Log Type Descriptors: 3
Descriptor 1: POST error
Data Format 1: POST results bitmap
Descriptor 2: Single-bit ECC memory error
Data Format 2: Multiple-event
Descriptor 3: Multi-bit ECC memory error
Data Format 3: Multiple-event
Handle 0x001A, DMI type 23, 13 bytes
System Reset
Status: Enabled
Watchdog Timer: Present
Boot Option: Do Not Reboot
Boot Option On Limit: Do Not Reboot
Reset Count: Unknown
Reset Limit: Unknown
Timer Interval: Unknown
Timeout: Unknown
Handle 0x001A, DMI type 32, 20 bytes
System Boot Information
Status: No errors detected
Help: execute the command "dmidecode -t system"
Prompt: - linux$ - linux#
iwconfig¶
Output:
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 IEEE 802.11 ESSID:"My_home"
Mode:Managed Frequency:5.18 GHz Access Point: AA:AA:AA:AA:AA:AA
Bit Rate=24 Mb/s Tx-Power=31 dBm
Retry short limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:on
Link Quality=56/70 Signal level=-54 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:155 Invalid misc:0 Missed beacon:0
wlan1 IEEE 802.11 ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=20 dBm
Retry short limit:7 RTS thr:off Fragment thr:off
Power Management:off
wlan2 IEEE 802.11 ESSID:"My_other_home"
Mode:Managed Frequency:5.22 GHz Access Point: AA:AA:AA:AA:AA:AA
Bit Rate=200 Mb/s Tx-Power=31 dBm
Retry short limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:on
Link Quality=62/70 Signal level=-48 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:7 Invalid misc:0 Missed beacon:0
wlan3 unassociated Nickname:"<WIFI@REALTEK>"
Mode:Managed Frequency=5.18 GHz Access Point: Not-Associated
Sensitivity:0/0
Retry:off RTS thr:off Fragment thr:off
Power Management:off
Link Quality:0 Signal level:0 Noise level:0
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
wlan4 IEEE 802.11AX ESSID:"My_home" Nickname:"<WIFI@REALTEK>"
Mode:Managed Frequency:5.18 GHz Access Point: AA:AA:AA:AA:AA:AA
Bit Rate:574 Mb/s Sensitivity:0/0
Retry:off RTS thr:off Fragment thr:off
Power Management:off
Link Quality=58/100 Signal level=58/100 Noise level=0/100
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
wlan5 IEEE 802.11bgn ESSID:"HS" Nickname:"<WIFI@REALTEK>"
Mode:Managed Frequency:2.452 GHz Access Point: AA:AA:AA:AA:AA:AA
Bit Rate:300 Mb/s Sensitivity:0/0
Retry:off RTS thr:off Fragment thr:off
Power Management:off
Link Quality=60/100 Signal level=60/100 Noise level=0/100
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon:0
wlan6 IEEE 802.11 ESSID:"HS"
Mode:Managed Frequency:2.452 GHz Access Point: AA:AA:AA:AA:AA:AA
Bit Rate=72.2 Mb/s Tx-Power=31 dBm
Retry short limit:7 RTS thr:off Fragment thr:off
Power Management:on
Link Quality=62/70 Signal level=-48 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:4 Invalid misc:0 Missed beacon:0
Help: execute the command "iwconfig"
Prompt: - linux$ - linux#
iwlist wlan0 scanning¶
Output:
wlan1 Scan completed :
Cell 01 - Address: AA:AA:AA:AA:AA:AA
ESSID:""
Protocol:IEEE 802.11bgn
Mode:Master
Frequency:2.422 GHz (Channel 3)
Encryption key:on
Bit Rates:780 Mb/s
Extra:rsn_ie=30140100000fac040100000fac040100000fac020000
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : CCMP
Pairwise Ciphers (1) : CCMP
Authentication Suites (1) : PSK
Quality=0/100 Signal level=57/100
Extra:fm=0002
Cell 03 - Address: AA:AA:AA:AA:AA:AA
ESSID:"Awdin"
Protocol:IEEE 802.11bgn
Mode:Master
Frequency:2.422 GHz (Channel 3)
Encryption key:on
Bit Rates:780 Mb/s
Extra:rsn_ie=30140100000fac040100000fac040100000fac020000
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : CCMP
Pairwise Ciphers (1) : CCMP
Authentication Suites (1) : PSK
IE: Unknown: DD9F0050F204104A0001101044000102103B00010310470010BC329E001DD811B286010000000000011021001852616C696E6B20546563686E6F6C6F67792C20436F72702E1023001C52616C696E6B20576972656C6573732041636365737320506F696E74102400065254323836301042000831323334353637381054000800060050F20400011011000B52616C696E6B4150535F3010080002008C103C000101
Quality=36/100 Signal level=56/100
Extra:fm=0003
Cell 05 - Address: AA:AA:AA:AA:AA:AA
ESSID:"HS"
Protocol:IEEE 802.11bgn
Mode:Master
Frequency:2.452 GHz (Channel 9)
Encryption key:off
Bit Rates:300 Mb/s
Quality=59/100 Signal level=59/100
Extra:fm=0003
Cell 07 - Address: AA:AA:AA:AA:AA:AA
ESSID:"Some-SSID2"
Protocol:IEEE 802.11gn
Mode:Master
Frequency:2.462 GHz (Channel 11)
Encryption key:on
Bit Rates:1.17 Gb/s
Extra:rsn_ie=30140100000fac040100000fac040100000fac020000
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : CCMP
Pairwise Ciphers (1) : CCMP
Authentication Suites (1) : PSK
Quality=20/100 Signal level=72/100
Extra:fm=0003
Cell 49 - Address: AA:AA:AA:AA:AA:AA
ESSID:"Some-SSID"
Protocol:IEEE 802.11AC
Mode:Master
Frequency:5.805 GHz
Encryption key:on
Bit Rates:867 Mb/s
Extra:rsn_ie=30160100000fac040100000fac040100000fac023c000000
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : CCMP
Pairwise Ciphers (1) : CCMP
Authentication Suites (1) : PSK
IE: Unknown: DD5C0050F204104A00011010440001021049000600372A0001201054000800070050F20000001011000A53595332312D303033341049002600013720010001072002000A53595332312D303033342005000C3137322E32302E322E323032
Quality=0/100 Signal level=38/100
Extra:fm=0002
Help: execute the command "iwlist wlan0 scanning"
Prompt: - linux$ - linux#
nmcli connection show¶
Output:
NAME UUID TYPE DEVICE
Wired connection 1 4c73e12a-1934-3ea9-96bc-b13580626d18 ethernet eth0
lo 8fa1d0f5-729e-47d6-b791-ba82a1ecff0c loopback lo
My_other_home a48f5437-163b-4fb0-983f-c98d0fa117c6 wifi wlan0
My_home 2c794a07-a61d-4276-bc16-c90459cb17ab wifi --
Help: execute the command "nmcli connection show"
Prompt: - linux$ - linux#
pct config 1¶
Output:
arch: amd11
cores: 1111
cpulimit: 1
cpuunits: 1111
description: Something really bad
features: nesting=1
hostname: ntc_templates
memory: 1111
net0: name=eth0,bridge=vmbr0,firewall=1,gw=1.1.1.1,hwaddr=AA:AA:AA:AA:AA:AA,ip=1.1.1.2/8,type=veth
onboot: 1
ostype: ubuntu
rootfs: local:1/vm-1-disk-0.raw,size=1000G
swap: 1111
unprivileged: 0
lxc.apparmor.profile: unconfined
lxc.cgroup.devices.allow: a
lxc.apparmor.profile: unconfined
lxc.cgroup.devices.allow: a
tags: tag1,tag2,tag3
Help: execute the command "pct config 1"
Prompt: - linux$ - linux#
pct list¶
Output:
VMID Status Lock Name
100 stopped netmiko
101 stopped ntc_templates
1001 running something
Help: execute the command "pct list"
Prompt: - linux$ - linux#
pveversion¶
Output:
pve-manager/1.1-1/101a1111 (running kernel: 1.1.11-11-pve)
Help: execute the command "pveversion"
Prompt: - linux$ - linux#
qm config 1¶
Output:
bootdisk: ide0
cores: 2
cpulimit: 1
ide0: local:111/vm-111-disk-0.qcow2,size=10G
ide2: local:iso/ubuntu-24.04-live-server-amd64.iso,media=cdrom
memory: 1111
name: Super-Linux-Proxmox
net0: e1000=AA:AA:AA:AA:AA:AA,bridge=vmbr0
numa: 0
onboot: 1
ostype: other
smbios1: uuid=00a0a000-0aa0-0a00-a0aa-0aa0a0000a00
sockets: 1
Help: execute the command "qm config 1"
Prompt: - linux$ - linux#
qm list¶
Output:
VMID NAME STATUS MEM(MB) BOOTDISK(GB) PID
100 Screen-Sun-AAAAAAA running 1111 11.00 1111111
Help: execute the command "qm list"
Prompt: - linux$ - linux#
top¶
Output:
top - 12:33:53 up 2:11, 5 users, load average: 0.12, 0.40, 0.66
Tasks: 200 total, 1 running, 189 sleeping, 5 stopped, 5 zombie
%Cpu(s): 12.5 us, 12.5 sy, 0.0 ni, 62.5 id, 12.5 wa, 0.0 hi, 0.0 si, 0.0 st
MiB Mem : 7809.9 total, 4753.7 free, 2052.9 used, 1126.5 buff/cache
MiB Swap: 512.0 total, 512.0 free, 0.0 used. 5757.0 avail Mem
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
19516 admin 20 0 28.7g 880836 52224 S 12.5 11.0 6:51.26 node
30427 admin 20 0 11708 4864 2816 R 6.2 0.1 0:00.03 top
1 root 20 0 168332 11152 8400 S 0.0 0.1 0:01.14 systemd
4 root 0 -20 0 0 0 I 0.0 0.0 0:00.00 kworker/R-rcu_g
395 systemd+ 20 0 90708 6784 5888 S 0.0 0.1 0:00.18 systemd-timesyn
397 root 0 -20 0 0 0 I 0.0 0.0 0:00.68 kworker/u13:1-brcmf_wq/mmc1:0001:1
402 root -51 0 0 0 0 S 0.0 0.0 0:00.00 irq/41-vc4 hdmi hpd connected
30343 admin 20 0 5200 1408 1408 S 0.0 0.0 0:00.00 sleep
Help: execute the command "top"
Prompt: - linux$ - linux#
vzlist¶
Output:
CTID NPROC STATUS IP_ADDR HOSTNAME
1110 1 running - something
1111 111 running 192.168.0.1 something-bad
1112 11 running - something-ugly
1113 11 running - something-good
Help: execute the command "vzlist"
Prompt: - linux$ - linux#